Hc Verma II Solutions for Class 11 Science Physics Chapter 32 Electric Current In Conductors are provided here with simple step-by-step explanations. These solutions for Electric Current In Conductors are extremely popular among Class 11 Science students for Physics Electric Current In Conductors Solutions come handy for quickly completing your homework and preparing for exams. All questions and answers from the Hc Verma II Book of Class 11 Science Physics Chapter 32 are provided here for you for free. You will also love the ad-free experience on Meritnation’s Hc Verma II Solutions. All Hc Verma II Solutions for class Class 11 Science Physics are prepared by experts and are 100% accurate.

Page No 196:

Answer:


(a) When the three resistors are connected in series:



The resultant resistance, Req = R + R + R = 90 Ω

(b) When the three resistors are connected in parallel:



The resultant resistance of the combination,

1Req=1R+1R+1R=3R=330=110
Req=10Ω

(c) When two of the resistors are connected in parallel and this combination is connected in series with the third resistor:



Let R' be the resultant resistance of the two resistors connected in parallel to each other. Therefore,

1R'=1R+1R=2R=230=115
R'=15 Ω

Now, the net resistance of the combination of the resistors,

Req = R' + R = 15 + 30 = 45 Ω

(d) When two of the resistors are connected in series and the combination is connected to the third resistor in parallel:



Let R' be the resultant resistance of the series in combination. Therefore,

R' = R + R = 30 + 30 = 60 Ω

Now, let the net resultant of the combination be Req. So,

1Req=1R'+1R=160+130=360=120
Req=20 Ω

Page No 196:

Answer:

Yes, there is an electric current in the direction of the proton beam. Conventionally, the direction of electric current is same as that of the positive charge flow.

Page No 196:

Answer:

Yes, there is a net current that flows from left to right. By convention, the direction of current is along the flow of positive charge. As the positive ions move from left to right, current also moves from left to right. Also, since the negative ions move from right to left, current moves from left to right. Thus, the movement of net current is from left to right.

Page No 196:

Answer:

Conventionally, the direction of current is along the direction of flow of positive charge and opposite the direction of flow of negative charge. In a TV tube, current will flow from the front to the rear, as the direction of current is opposite the direction in which electrons are moving.

Page No 196:

Answer:

An electron drifts under the influence of an external electric field. During the course of this motion, an electron follows a very random path. So, we have to take the average for a very long time. Hence, we cannot define drift speed as the limit of Δlt as Δ→ 0 because this is a very short interval of time that is not enough to get the desired result.

Page No 196:

Answer:

You have studied in the previous chapters that when a static charge is given to a metal, the charge resides on its surface and there is no electric field inside it. But this is not the case when a charge is in motion. Current can flow through a conductor only when an electric field is established inside it. An electric field exists inside the conductor, as it is connected to the battery. Thus, current flows through the conductor.

Page No 196:

Answer:

No, the number of electrons in the wire remains constant. The electrons that drift and move to the positive terminal of the battery, under the influence of the external electric field, are replaced by the battery in the circuit. As a result, the total number of free electrons in the wire is always constant.

Page No 196:

Answer:

A copper wire has higher conductance than an aluminium wire. So, a copper wire offer less resistance to the current flow than an aluminium wire. Thus, there is more heat dissipation in an aluminium wire than in a copper wire. This is why a fan with copper winding in its motor consumes less power compared to a similar fan with aluminium winding.

Page No 196:

Answer:

In the expression U = Vit, voltage V and current i are variables for a given time interval. So, based on this expression we cannot say that U is proportional to i. In the expression U = i2Rt, the resistance R is fixed for a circuit for a given time interval. So, based on this expression, we can say that U is proportional to i2 and not i.

Page No 196:

Answer:

Yes, the "work done by the battery" and "the thermal energy developed" represent two names of the same physical quantity. The work done by the battery on the resistor is dissipated by the resistor in the form of thermal energy. Hence the " work done by the battery " and " the thermal energy developed " represent two names of the same physical quantity.
However, a non-ideal battery, in this case, would have to do extra work in order to overcome the internal resistance of the battery. Hence, the work done by a non-ideal battery will not be equal to the thermal energy developed.

Page No 196:

Answer:

No, the work done by a battery is not always equal to the thermal energy developed in the electrical circuit. In case of a non-ideal battery, the work done by the battery is the sum of the thermal energy developed in the electric circuit and the thermal energy developed in the internal resistance of the battery. In case of a capacitor, the work done by the battery is equal to C V2. An amount of energy equal to 12 C V2 is stored in it when it is fully charged, which is a form of electrical energy and not a form of thermal energy. During the charging of the capacitor,  12 C V2 of energy is lost in the form of heat and electromagnetic radiation.

Page No 196:

Answer:

No, the work done by a non-ideal battery is not equal to the thermal energy developed in the resistor, as energy is spent to overcome the internal resistance of the battery and the resistance of the wire that connects the circuit elements/resistor to the battery. However, the resistance of the wire is generally negligible.

Yes, the answer will change if the battery is ideal. An ideal battery has no internal resistance. Hence, the work done by an ideal battery will be equal to the thermal energy developed in the resistor, assuming that the resistance of the wires used for connection is negligible.

Page No 196:

Answer:

Yes, the given statement is correct. When charge flows through a conductor, its electric potential energy decreases. This loss in electric potential energy appears as increased heat energy of the resistor. Thus, heat energy is developed in a resistor when there is an electric current in it.

Page No 196:

Answer:

When there is a transfer of charge through a wire, current is said to be flowing through it. It is the electron/charge that drifts through the wire. The assertions "charge is going" and "current is going through the wire" are correct, as they signify the same thing, that is, flow of charge.

Page No 196:

Answer:

A potentiometer is preferred to measure the emf of a battery, as it gives a more accurate result. This is because a potentiometer uses the null method to measure emf and it hardly draws any current from the primary circuit.

When a voltmeter is used in the circuit, its equivalent resistance is connected parallel to some element of the circuit. This changes the overall current in the circuit and, hence, the potential difference to be measured also changes. The error can be minimised if the equivalent resistance of the voltmeter is increased. However, we also need to keep in mind the heat dissipated due to high resistance while deciding the value of resistance of the voltmeter.

Hence a potentiometer is preferred.

Page No 196:

Answer:

No, a conductor does not become charged when a current is passed through it. The free electrons present in the valence shell in a circuit drift  from a lower potential to a higher potential and, thus, current is produced. A battery does not provide any extra electrons or charge to the circuit. It just provides a potential difference across two points, which helps in creating an electric field. This further helps in moving the electrons along the conductor.

Page No 196:

Answer:

The potential difference across a battery cannot be greater than its emf. Basically, emf is the maximum potential difference between the terminals of a battery when the terminals are not connected externally to an electric circuit. When the same battery is connected to an electric circuit, current flows in the closed circuit.  When current flows, the potential difference across the terminals of the battery is decreased as some potential drop due to its internal resistance.

Due to the internal resistance in the battery, the potential difference across it is less than its emf. However, for an ideal battery, potential difference and emf are equal.

Page No 196:

Answer:

(a) increase

If the number of collisions of the free electrons with the lattice is decreased, then the drift velocity of the electrons increases.
Current i is directly proportional to the drift velocity 'Vd' and is given by the following relation:
i = neAVd , where 'n'  is the number density of electrons and 'A' is the area of the cross-section of the conductor.
So, we can easily see that current increases with increase in drift velocity.

Page No 196:

Answer:

(d) The information is not sufficient to find the relation between ρA and ρB.

The resistance R of a conductor depends on its resistivity ρ, length l and cross-sectional area A. Thus,

R=ρlA
From the given comparison of resistances, we cannot derive the correct relation between the resistances. We also need to know the cross-sectional areas and the lengths of both the conductors before concluding about their resistivities. Only then can the relation between the resistivities be found.

The information is not sufficient to find the relation between ρA and ρB.

Hence, the correct option is (d)

Page No 196:

Answer:

(d) None of these

The relation between the resistivity ρ and conductivity σ of a material is given by
ρ=1σρ×σ=1

The product of conductivity and resistivity is unity. So, this product does not depend on any of the given quantities.

Page No 196:

Answer:

(d) may increase or  decrease

The product of resistivity and conductivity is independent of temperature. As the temperature of a metallic resistor is increased, the resistivity increases and conductivity decreases. Hence, both the conductivity and resistivity of the metallic resistor nullify the effect of the change in temperature.

Page No 196:

Answer:

(b) may go from the positive terminal to the negative terminal

In the study of electric current, the direction opposite the flow of electrons is regarded as the direction of flow of positive charge. In a battery, positive charge flows from the negative terminal to the positive terminal when it is discharging (connected to external circuit). But when the battery is charged, the positive charge flows from the positive terminal to the negative terminal.

Page No 196:

Answer:

(a) increase

As the resistance is connected to an ideal battery, it provides a constant potential difference across the two terminals. The internal resistance of the battery is also zero.
The power dissipated in the resistor,
PV2R

V is constant; hence V 1R

Thus, if the value of the resistance is decreased, the power dissipated in the resistor will increase.

Page No 196:

Answer:

(c) K1 > K2 

The metal ions are bound at their positions and vibrate due to collisions with electrons and due to thermal energy. The conduction electrons are free to move. They get energy from the electric field set inside the conductor by connection with a battery and due to thermal motion. The velocity of the electrons is high.
Thus, the kinetic energy of the electrons is greater than the kinetic energy of the metal ions.

Page No 196:

Answer:

(a) 1 : 2

Thermal energy developed across a resistor,

U = i2Rt ,

where i is the current flowing through the resistor of resistance R for time t. Since the resistors are connected in series, the current flowing through both the resistors is same and the time for which the current flows is also same.

Thus, the ratio of the thermal energy developed in R and 2 R is 1 : 2.

Page No 196:

Answer:

(b) 2 : 1

Thermal energy developed in the resistances,
 =V2Rt
Heat developed in the resistance R, H1=V2Rt
Heat developed in the resistance 2R, H2 = V22Rt

Thus, Heat developed in the resistance R and 2R are in ratio 2:1.
 

Page No 196:

Answer:

(a) 2 Ω

Resistance of a wire is directly proportional to its length.
So, when we cut the wire into 5 equal parts, the resistance of each part will be 10 Ω.
On connecting these wires in parallel, the net resistance will be
1R= 110+110+110+110+110  R = 2 Ω

 



Page No 197:

Answer:

(a) A and B are correct.

According to Kirchhoff's junction law, the net charge coming towards a point should be equal to the net charge going away from that point in the same time. It follows from the principle of conservation of charge.
The loop law follows from the fact that electrostatic force is a conservative force and the work done by it in any closed path is zero.

 

Page No 197:

Answer:

(b) A is correct but B is wrong.

Let the emfs of the batteries be e1 and e2, and their respective resistances be r1 and r2.

Since the batteries are connected in series, the equivalent emf will be the sum of the emf of the two batteries ( e = e1 + e2) .
Thus, e > e1 and  e > e2
Thus, the equivalent emf is larger than either of the two emfs. Hence, statement A is correct.

Since the batteries are connected in series, the equivalent internal resistance (r) of the combination will be the sum of the internal resistance of the two batteries ( r = r1 + r2).
r > r1 and r > r2

Thus, the equivalent internal resistance is greater that either of the two resistances. Hence, statement B is wrong.

Page No 197:

Answer:

(c) B is correct but A is wrong.

The equivalent emf ε0 , when two non-ideal batteries of emfs ε1 and ε2 and internal resistances r1 and r2 respectively are connected in parallel to each other, is given by:

ε0=ε1r1+ε2r2r1+r2

Thus, the equivalent emf is greater than either of the emfs. Thus, statement A is wrong.

For the parallel combination of the batteries of internal resistance r1 and r2, the equivalent internal resistance r is given as

r=r1r2r1+r2

Thus, the value of the resultant resistance is even smaller than either resistance.

Page No 197:

Answer:

(d) it does not appreciably change the current to be measured

The ammeter is connected in series with the circuit to measure the net amount of current flowing through the circuit. If the net resistance of the ammeter is high, then the amount of current that the circuit draws will have error. Hence, we cannot accurately measure the amount of current that the circuit draws from the voltage source. Hence, the net resistance or the equivalent resistance of an ammeter should be small enough to ensure that it does not appreciably change the current to be measured.

Page No 197:

Answer:

(d) it does not appreciably change the potential difference to be measured

To measure potential difference across any circuit element, the voltmeter is connected in parallel to that circuit element. Let Req be the equivalent resistance of the voltmeter and V be the potential difference across the voltmeter.
Then, the current through the voltmeter, i = VReq
Hence, the deflection in the voltmeter is proportional to the current i and, hence, proportional to V. However, when the voltmeter is used in a circuit, its resistance Req is connected in parallel to some circuit element. This might change the overall resistance of the circuit and, hence, the current. Consequently, the potential difference to be measured is also changed. To minimise the error due to this, the equivalent resistance Req of the voltmeter should be large. When a large resistance is connected in parallel to a small resistance, the equivalent resistance is only slightly less than the smaller one.

Page No 197:

Answer:

(b) Q1 > Q2, t1 < t2

The charge Q on the plates of a capacitor at time t after connecting it in a charging circuit,
Q=εC(1-e-t/RC),
where
ε = emf of the battery connected in the charging circuit
C = capacitance of the given capacitor
R = resistance of the resistor connected in series with the capacitor

The charge developed on the plates of the capacitor in first 10 mili seconds is given by
Q1=εC(1-e-10×10-3/RC)
The charge developed on the plates of the capacitor in first 20 mili seconds is given by
Q'=εC(1-e-20×10-3/RC)

The charge developed at the plates of the capacitor in the interval t = 10 mili seconds to 20 mili seconds is given by
Q2=Q'-Q1Q2=εC(1-e-20×10-3/RC) - εC(1-e-10×10-3/RC)Q2=εC(e-10×10-3/RC- e-20×10-3/RC)Q2=εC(e-10×10-3/RC)(1- e-10×10-3/RC)
Comparing Q1 with Q2 
Q1=εC(1-e-10×10-3/RC), Q2=εCe-10×10-3/RC(1-e-10×10-3/RC)Q1Q2=1e-10×10-3/RCe-10×10-3/RC<1Q1>Q2

For second part of the question

10 μC charge be deposited in a time interval t1 and the next 10 μC charge is deposited in the next time interval t2.
The time taken for 10 μC charge to develop on the plates of the capacitor is t1
10 μC=εC(1-e-t1/RC)    ...(1)
The time taken for 20 μC charge to develop on the plates of the capacitor is t'
20 μC=εC(1-e-t2/RC)    ....(2)

Dividing (2) by (1)
20 μC10 μC=εC(1-e-t2/RC)εC(1-e-t1/RC)2=(1-e-t2/RC)(1-e-t1/RC)2(1-e-t1/RC) = (1-e-t2/RC) e-t2/RC=2e-t1/RC-1

Taking natural log both side,
t2RC=ln(2)+t1RC
t1 < t2

Page No 197:

Answer:

(a) The speed of the electrons is more at B than at A.

Let the potentials at A and B be VA  and VB.
As potential, E=-dVdr ,
potential increases in the direction opposite to the direction of the electric field.
Thus, VA < VB
Potential energy of the electrons at points A and B:
UA = -eVA
UB = -eVB
Thus, UA > UB
Let the kinetic energy of an electron at points A and B be KA and KB respectively.

Applying the principle of conservation of mechanical energy, we get:

UA  + KA  = UB  + KB
As, UA > UB,
 KA < KB
Therefore, the speed of the electrons is more at B than at A.

Page No 197:

Answer:

(b) There is no current through B.
(c) There is a current through A as long as the charging is not complete.

As the capacitor is connected to the battery at t = 0, current flows through the wire up to the time the capacitor is charged. As the capacitor is completely charged, the potential difference across the capacitor is equal to the terminal potential of the battery. So, the current stops flowing and does not pass through the point between the plates of the capacitor, as there is no medium for the flow of charge.

Page No 197:

Answer:

(c) the average velocity of a free electron over a large period of time is zero
(d) the average of the velocities of all the free electrons at an instant is zero

When no current is passed through a conductor, it means that there is no net charge transfer through it. The free electrons are in random motion. The net charge transfer through the cross-section of the conductor  is zero. As there is no net charge transfer at any instant, it means that the average of the velocities of all the free electrons at an instant is zero. If we see the motion of each electron as its motion is random and there is no net transfer of charge. Thus, it can be concluded that the average velocity of a free electron over a large period of time is zero.

Page No 197:

Answer:

(d) Number of free electrons

As the resistor connected to the battery is heated, the thermal energy of the electrons increases. Thus, the relaxation time of the electrons will decrease and so will the drift velocity. Resistivity is inversely proportional to the relaxation time; thus, resistivity will increase with decrease in relaxation time. Therefore, resistance will also change. The number of electrons in a resistor will remain same.

Page No 197:

Answer:

(a) increases

Resistivity (ρ) of a conductor is the reciprocal of the its conductivity(σ). Thus,
ρ=1σ
The ratio of the resistivity and the conductivity,

ρσ=ρ1/ρ=ρ2
As resistivity increases with temperature, the square of resistivity will also increase. Hence, the ratio of resistivity and conductivity will increase with increase in temperature.

Page No 197:

Answer:

(a) The charge crossing in a given time interval
(d) Free-electron density

Drift speed and current density are inversely proportional to the area of cross-section of a wire. Thus, they are dependent on the cross-section. The charge crossing in a given time interval is independent of the area of cross-section of the wire. Free electron density is the total number of free electrons per unit volume of the wire. The density of free electrons depends on the distribution of the free electrons throughout the volume of the wire. It does not depend on the cross-section of the wire.

Page No 197:

Answer:

(a) An ammeter should have small resistance.
(d) A voltmeter should have large resistance.

The ammeter is connected in series in the circuit whose current is to be measured. If the net resistance of the ammeter is high, then the amount of current that the circuit draws will have error . So, we won't be able to accurately measure the amount of current that the circuit draws from the voltage source. Thus, it should have a small resistance.

To measure the potential difference across any circuit element, the voltmeter is connected in parallel to that circuit element. If the resistance of the voltmeter is large, then maximum voltage drop occurs across the voltmeter and it will measure the correct value of the potential.



Page No 198:

Answer:

(a) 5 s
(b) 50 s
(c) 500 s
(d) 500 s

The charge (Q) on the capacitor at any instant t,
Q=CV(1-e-t/RC),
where
C = capacitance of the given capacitance
R =  resistance of the resistor connected in series with the capacitor
RC = (10 × 103) × (500 × 10-6) = 5 s
The charge on the capacitor in the first 5 seconds,
Q0=CV(1-e-5/5)=CV×0.632 
The charge on the capacitor in the first 10 seconds,
Q1=CV(1-e-10/5)Q1=CV(1-e-2)=0.864×CV
Charge developed in the next 5 seconds,
Q' = Q1 - Q0
Q' =  CV(0.864 - 0.632) = 0.232 CV

The charge on the capacitor in the first 55 seconds,
Q2=CV(1-e-55/5)Q2=CV(1-e-11)=0.99×CV
Charge developed in the next 50 seconds,
Q' = Q2 - Q0
Q' =  CV(0.99 - 0.632) = 0.358 CV

Charge developed in the first 505 seconds,
Q3=CV(1-e-500/5)=CV(1-e-100)CV
Charge developed in the next 500 seconds,
Q' = CV (1- 0.632) = 0.368 CV

Thus, the charge developed on the capacitor in the first 5 seconds is greater than the charge developed in the next 5,50, 500 seconds.
Disclaimer : Out of the four given options, two options are same.

Page No 198:

Answer:

(b) The currents in  the two discharging circuits at t = 0 are equal but not zero.
(d) C1 loses 50% of its initial charge sooner than C2 loses 50% of its initial charge.

Let the voltage of the battery connected to the capacitors be V. Both the capacitors will charge up to the same potential (V).
The charge on the capacitors C1 is C1V = (1 μF)×V
The charge on the capacitors C2 is C2V = (2 μF)×V
The charge on the discharging circuit at an instant t,
Q=CVe-t/RC
The current through the discharging circuit,
dQdt=-CVRCe-t/RC=VRe-t/RC
At t = 0, the current through the discharging circuit will be VR for both the capacitors.

Let the time taken by the capacitor C1 to lose 50% of the charge be t1.
Q1=C1V2C1V2=C1Ve-t1/RC12=e-t1/RC
Taking natural log on both sides, we get:
-ln2=-t1RC1t1=RC1ln2
Similarly,
Time taken for capacitor C2t2=RC2ln2
As, C1 < C2, t1 < t2
Thus, we can say that C1 loses 50% of its initial charge sooner than C2 loses 50% of its initial charge.

Page No 198:

Answer:

(a) Amount of charge,
Q(t) = At2 + Bt + C
We can only add the terms with the same dimensions. So, all the individual terms will have dimensions equal to the dimensions of the charge.
Comparing the dimensions of each term separately, we get:
At2=QA=Qt2Q=It A=It=AT-1,
where I = current through the wire
Now,
Bt=QB=Qt=I=A
Also,
C=QC=AT

(b) Current I = rate of flow of charge
I=dQdt=ddtAt2+Bt+CI=2At+B A=5, B=3 and t=5 sI=2×5×5+3=53 A

Page No 198:

Answer:

Rate of emission of electrons = 2 ×1016 per second
Total charge passing through the gun = 2 ×1016 ×1.6 × 10–19 = 3.2 × 10–3 per second

We know:
Current, I = rate of flow of charge
I = 3.2 × 10–3 A

Page No 198:

Answer:

Let Q amount of charge be transferred across the cross-section of the tube.
Given:
Current through the discharge tube, I = 2 μA = 2 × 10–6 A                                        
Time taken to transfer charge, t = 5 mins = 300 s
We know:
Q = It
Q = 2 × 10–6 × 300 = 6× 10–4 C
     
  

Page No 198:

Answer:

Current through the wire varies with time as
i = i0 + α t
Time interval, t = 10 s
i0 = 10 A
α = 4 A/sec
We know that for variable current,

q=0tidtq=0ti0+αt dtq=i0t+αt22q=10×10+4×1022=100+200=300 C

Page No 198:

Answer:

Given:
Current, i = 1 A
Area of cross-section, A = 1 mm2 = 1 × 10–6 m2
Density of copper, ρ = 9000 kg/m3
Length of the conductor = l
Also,
Mass of copper wire = Volume × density
m=A×l×ρm=A×l×9000  kg
We know that the number of atoms in molecular mass M = NA
∴ Number of atoms in mass m, N = NAMm,
where NA is known as Avagadro's number and is equal to 6 × 1023 atoms.
N=NAMmN=NAM×A×l×9000
Also, it is given that
No. of free electrons = No. of atoms
Let n be the number of free electrons per unit volume

n=Number of electrons Volume  =NA×A×l×9000M×A×l  =NA×9000M  =6×1023×900063.5×10-3 i=VdnAeVd=16×1023×900063.5×10-3×10-6×1.6×10-19=63.5×10-36×1023×9000×10-6×1.6×10-19=63.5×10-36×1026× 9×10-6×1.6×10-19=63.5×10-36×9×16=0.073×10-3 m/s = 0.073 mm/s

Page No 198:

Answer:

Let ρ be the resistivity of the wire.
Given:
Length, l  = 1 m
Radius, r = 0.1 × 10–3 m
Area, A = πr2
Resistance, R = 1000 Ω
We know:
R=ρlAρ=RAl      =1000×π×0.1×0.1×10-61      =π×10-6  Ωm

Page No 198:

Answer:

Let
Resistivity of the wire = ρ
Original length of the wire = l
New length of the wire = l'
Original area of the wire = A
New area of the wire = A'
Original resistance of the wire = R = 100 Ω
New resistance of the wire = R'
Given:
l' = 2l

The volume of the wire remains constant. So,
Al=A'l'A'=A2
We know:
R=ρlAR'=ρl'A'R'R=l'AlA'l'=2l, A'=A2R'R=2lAlA2=4R'=4R=400 Ω

Page No 198:

Answer:

Given:
Current through the wire, i = 2 A
Length of the wire, l = 4 m
Area of cross section, A = 1 mm2 = 1 × 10–6 m2
Number of electrons per unit volume, n = 1029
We know:
i=nAVdeVd=inAe=21029×10-6×1.6×10-19Vd=18000 m/s,
where Vd is the drift speed.
Let t be the time taken by an electron to cross the length of the wire.
t=Length of the wireDrift speed=lVd t=418000=32×103 s

Page No 198:

Answer:

Given:
Resistivity of copper, ρcu = 1.7 × 10–8 Ωm
Area of cross-section, A = 0.01 mm2 = 0.01 × 10–6 m2
Required resistance, R = 1 kΩ = 103 Ω
Let l be the required length of the copper wire.
We know:
R=ρlAl=RAρcul=103×0.01×10-61.7×10-8l=0.58×103 m=0.6 km

Page No 198:

Answer:

Let us consider a small element strip of length dx at a distance x from one end, as shown below.


Let the resistance of the small element strip be dR. Let the radius at that point be c .
Then, the resistance of this small strip,
 dR=ρdxπc2        ...itanθ=c-ax=b-aLc-ax=b-aLL×c-a=x×b-aLc-La=xb-xa
Differentiating w.r.t to x, we get:
  Ldcdx-0=b-a       dx=Ldcb-a         ...ii
Substituting the value of dx in equation (i), we get:
dR=ρLdcπc2b-adR=ρLπb-a­·dcc2
Integrating dR from a to b, we get:
0RdR=ρLπb-aabdcc2R=ρLπb-a-1cab        =ρLπb-a-1b--1a        =ρLπab

Page No 198:

Answer:

Given:
Radius of the wire, r = 0.1 mm = 10-4 m
Resistance, R = 1 kΩ = 103 Ω
Voltage across the ends of the wire, V = 20 V

(a) Let q be the charge transferred per second and n be the number of electrons transferred per second.
We know:
i=VRi=20 V103 Ωi=20×10-3=2×10-2 A q=itq=2×10-2 ×1q=2×10-2 C
Also,
q = ne
n=qe=2×10-21.6×10-19n=1.25×1017

(b) Current density of a wire,
j=iAj=2×10-23.14×10-8j=6.37×105 A/m2

Page No 198:

Answer:

Given:
Area of cross-section, A = 2 × 10–6 m2
Current through the wire, i = 1 A
Resistivity of copper, ρ = 1.7 × 10–8 Ωm
Resistance of a wire,
R=ρlA
Also from Ohm's Law, voltage across a wire,
V=iR=iρlA
The electric field of the wire,
E=VlE=iρlAl=iρAE=1×1.7×10-82×10-6E=8.5 V/m

Page No 198:

Answer:

Given:
Length of the wire, l = 2 m
Resistance of the wire, R = 5 Ω
Current through the wire, i = 10 A
From Ohm's Law, the potential difference across the wire,
V = iR
∴ V= 10 × 5 = 50 V
Electric field,
E=Vl=502=25 V/m

Page No 198:

Answer:

Given:
Resistance RFe of the iron wire at 20°C = 3.9 Ω
Resistance RCu of the copper wire at 20°C = 4.1 Ω
Temperature coefficient αFe for iron = 5.0 × 10–3 K–1
Temperature coefficient αCu for copper = 4.0 × 10–3 K–1
Let
The temperature at which the resistance be equal = T
Resistance of iron wire at T °C = RFe'
Resistance of copper wire at T °C = RCu'
We know:
R=R0(1+αT)
Here, ΔT = T - 20
RFe'=RFe 1+αFe T-20RCu'=RCu 1+αCu T-20 RFe'=RCu'RFe 1+αFe T-20=RCu 1+αCu T-203.9 1+5×10-3 T-20=4.1 1+4×10-3 T-203.9+3.9×5×10-3 T-20=4.1+4.1×4×10-3 T-204.1×4×10-3 T-20-3.9×5×10-3 T-20=-4.1+3.916.4 T-20-19.5 T-20=-0.2×103T-20-3.1=-0.2×103T-20=64.5T=84.5 °C

Page No 198:

Answer:

Let the magnitude of zero error in the voltmeter reading be V.
We need to subtract the zero error from the readings obtained under the two given conditions to obtain the true value of potential difference.
Under both the conditions ,the resistance of the wire will not change.
R1=R2V1I1=V2I2
I1RI2R=V1V21.752.75=14.4-V22.4-V0.350.55=14.4-V22.4-V711=14.4-V22.4-V7×22.4-V=1114.4-V156.8-7V=158.4-11V7-11V=156.8-158.4-4V=-1.6V=0.4 V
Magnitude of zero error, V = 0.4 V, which can either be positive or negative. Positive or negative zero error just indicates that the needle of the voltmeter is to the right or left of the zero marked on the device if zero voltage is applied across the voltmeter.

Page No 198:

Answer:

(a)
When the switch S is opened, loop 2 will be open and no current will pass through the ammeter. Loop 1 will be closed; so, a current will flow through it. But since the voltmeter has very high resistance, compared to the internal resistance of the battery, the voltage-drop across the internal resistance can be ignored, compared to the voltage drop across the voltmeter. So, the voltage appearing across the voltmeter will be almost equal to the emf of the battery.
ε = 1.52 V

(b) When the switch is closed, current will pass through the circuit in loop 2. In this case, there will be a voltage drop across r due to current i flowing through it.
Applying the loop rule, we get: 
ε – ir = 1.45
⇒ 1.52 ir = 1.45
ir = 0.07
⇒ 1.r = 0.07
r = 0.07 Ω

Page No 198:

Answer:

Given:
Emf of the battery, E = 6 V
Internal resistance, r = 1 Ω
Potential difference, V = 5.8 V
Let R be the resistance of the external resistor.

Applying KVL in the above circuit, we get:
E-i(R+r)=0i=ER+r=6R+1
Also,
V=E-ir5.8=6-6R+1×16R+1=0.2R+1=60.2=30R=29 Ω



Page No 199:

Answer:

Given:
Potential difference across the terminals of the battery, V = 7.2 V
Emf of the battery, E = 6 V
Current flowing through the circuit, i = 2 A
As the battery is getting charged, the voltage drop across the terminals of the battery will be equal to the emf of the battery plus the voltage drop across the internal resistance of the battery.
So, V = E + ir
⇒ 7.2 = 6 + 2 × r
⇒ 1.2 = 2r
r = 0.6 Ω

Page No 199:

Answer:

(a) When the battery is being charged:
Emf of the battery, E = 6 V
Internal resistance of the battery, r = 10 Ω
Potential difference, V = 9 V
Net e.m.f. across the resistance while charging = 9 – 6 = 3 V
 Current = 310=0.3 A


(b) When the battery is completely charged:
Internal resistance, r' = 1 Ω
Current = 31=3A

Page No 199:

Answer:

(a) For R = 0.1 Ω:
Applying KVL in the given circuit, we get:

0.1i1+1i1-6+1i1-6=00.1i1+1i1+1i1=12i1=122.1=5.71 A
Now, consider the given circuit.

Applying KVL in the loop ABCDA, we get:

0.1i2+1i-6=00.1i2+i=6i=6-0.1i2

Applying KVL in ADEFA, we get:

i-6+6-i2-i1=0i-i2+i=02i-i2=026-0.1 i2-i2=0 i2=10 A

 i1i2=0.571

(b) For R = 1 Ω:
Applying KVL in the circuit given in figure 1, we get:
1i1+1.i1-6+i1-6=03i1=12i1=4
Now, for figure 2:
Applying KVL in ABCDA, we get:
 i2+i-6=0 i2+i=6
Applying KVL in ADEFA, we get:
i-6+6-i2-i1=0i-i2+i=02i-i2=026-i2-i2=0 12-3i2=0i2=4 Ai1i2=1

(c) For R = 10 Ω:
Applying KVL in the circuit given in figure 1, we get:
10i1+1i1-6+1i1-6=0
12i1=12i1=1
Now, for figure 2:
Applying KVL in ABCDA, we get:
 10i2+i-6=0i=6-10i2
Applying KVL in ADEFA, we get:
i-6+6-i2-i1=0i-i2+i=02i-i2=026-10i2-i2=0 12-21i2=0i2=0.57 Ai1i2=1.75

Page No 199:

Answer:

(a)

Given:
Emf of one cell = E
∴ Total e.m.f. of n1 cells in one row = n1E
Total emf of one row will be equal to the net emf across all the n2 rows because of parallel connection.
Total resistance in one row = n1r
Total resistance of n2 rows in parallel =n1rn2
Net resistance of the circuit = R + n1rn2
Current, I= n1ER+n1rn2=n1n2 En2R+n1r

(b) From (a),
I=n1n2 En2R+n1r

For I to be maximum, (n1r + n2R) should be minimum
n1r-n2R2+2n1R n2r=min
It is minimum when
n1r=n2R   n1r=n2R
∴ I is maximum when n1r = n2R .

Page No 199:

Answer:

Given:
Emf of the battery, E = 100 volt
Resistance in series with battery, R' = 10 kΩ = 10000 Ω
External resistance, R = (1-100) Ω
When no external resistor is present (R = 0), current through the circuit,
i=ER'=1001000=0.01 Amp.
When R = 1 Ω,
i = 10010000+1=10010001  =0.009999 A
When R = 100 Ω,
i=10010000+100 =10010100=0.009900 A
We can see that up to R = 100 Ω, the current does not change up to two significant digits.

Page No 199:

Answer:


Given: i1 = 2.4 A
Since the 20 Ω and 30 Ω resistors are connected in parallel, the voltage across them will be the same.
From the figure,
20i1=30i-i150i1=30ii=50i130=3.99=4 A
∴ The reading of ammeter A3 = i = 4 A
The reading of ammeter A2 = i - i1 = 1.6 A

Page No 199:

Answer:

Current will be minimum when the rheostat will have maximum resistance, i.e 30 Ω.
In this case, total resistance of the circuit = 20×1030+30=36.67 Ω
The minimum current through the circuit,
imin=5.536.67=0.15 A
Current will be maximum when the rheostat will have minimum resistance, i.e. 0 Ω.
In this case, total resistance of the circuit = 20×1030=6.67 Ω
The maximum current through the circuit,
imax=5.56.67=0.825 A

Page No 199:

Answer:

(a) When all the bulbs are switched on, we have a combination of three bulbs in parallel.
The effective resistance of the circuit,
Reff=1803=60 Ω   
The current delivered by the battery,
 i=6060=1 A

(b) When two of the bulbs are switched on, they are parallel to each other.
The effective resistance of the circuit,
Reff=1802=90 Ω
The current delivered by the battery,
 i=6090=0.67 A

(c) When only one bulb is switched on, the effective resistance of the circuit,
Reff=180 Ω    
The current delivered by the battery,
 i=60180=0.33 A

Page No 199:

Answer:

We can obtain maximum resistance when all the resistors are connected in series.
So, maximum resistance,
Rmax=20+50+100 Ω=170 Ω
The minimum resistance will be obtained when all the resistors are connected in parallel
So, minimum resistance,

 Rmin=1120+150+1100=1008=12.5 Ω

Page No 199:

Answer:

We know:
R=V2P,
where R is the resistance, V is the voltage drop and P is the power on which the bulb is operated.
We can calculate the resistance of the bulb for the same V and different P.
The resistances of the bulb for three different powers are:
R1=1525=45 ΩR2=15210=22.5 ΩR3=15215=15 Ω
When the two resistance are used in parallel, the equivalent resistance will be less than their individual resistance.
∴ The two resistance are 45 Ω and 22.5 Ω.

Page No 199:

Answer:



Let the current flowing through the resistors be marked as shown in the figure.
Given: i = 12 mA
The resistors of 20 kΩ and 10 kΩ are connected in parallel. So, the potential difference across their ends will be same, i.e.
20i1=10i-i130i1=10ii1=i3=123=4 mA
∴ The current flowing through the 20 kΩ resistor = i1 = 4 mA
The current flowing through the 10 kΩ resistor = i - i1 = 8 mA
From the figure,
The current flowing through the 100 kΩ resistor = i = 12 mA

The equivalent resistance between the points A and B,
Rnet=5+20×1020+10+100 =111.67 
The potential difference V between the points A and B,
V=iRnetV=12×10-3×111.67×103=1340 V

Page No 199:

Answer:

Let the resistance of the first resistor be R.
If V is the potential difference across R, then the current through it,
i=5=VR
Now, the other resistor of 10 Ω is connected in parallel with R.
It is given that the new value of current through the circuit, i' = 6 A
The effective resistance of the circuit, R' = 10R10+R
Since the potential difference is constant,
iR=i'R'5×R=6×10R10+R10+R5=605R=10R=2 Ω

Page No 199:

Answer:

The simplified circuit can be drawn as shown below.

Equivalent resistance =11r+1r+1r=r3

Page No 199:

Answer:

(a)
From the figure, it can be seen that between points A and B, the resistance of the first side of the hexagon will be in parallel with the total resistance of the other five sides.
The resistance of the first side can be calculated as shown below.
Resistance of the first leg=Length of the that portionTotal length×R=1656+16×15=15×16
Total resistance of the 5 legs=5616+56×15=56×15
∴ The effective resistance between the points A and B,
Reff=15×56×15615×56+156=15×5×156×675+156      =15×5×156×90=2512      =2.08 Ω

(b) From the figure, it can be seen that between points A and C, the resistance of the first two sides of the hexagon will be in parallel with the total resistance of the other four sides.
Resistance of the two legs =Length of the that portionTotal length×R=2646+26×15=15×26
Total resistance of the four legs=4626+46×15=46×15
∴ The effective resistance between the points A and C,
Reff=15×46×15×2615×46+15×26=15×4×2×156×660+306      =15×2×4×156×90      =103=3.33 Ω

(c) From the figure, it can be seen that between points A and D, the resistance of the first three sides of the hexagon will be in parallel with the total resistance of the other three sides.
Resistance of the three legs = Length of the that portionTotal length×R=3636+36×15=15×36

∴ The effective resistance between the points A and D,
Reff=15×36×15×3615×36+15×36=15×3×3×156×6906      =15×3×3×156×90=154=3.75 Ω

Page No 199:

Answer:

(a) When S is open, the resistors will be connected in series, as the current will flow through the 20 Ω resistor. The effective resistance,
Reff=10+20 Ω=30 Ω  
The current flowing through the circuit,
 i=330 A=0.1 A

(b) When S is closed, current will flow through the switch that offers the least resistive path. So, the 20 Ω resistance will be ineffective in this case. The effective resistance in this case,
Reff=10 Ω    
The current flowing through the circuit,
i=310 A=0.3 A



Page No 200:

Answer:


From the figure, we can see that current will flow only in loop 1 because current follows the least resistive path. All the current will pass through the wire connected in parallel to the 4 Ω resistor in loop 2.
∴ There will be no current through the 4 Ω resistor in loop 2.
For loop1, applying KVL, we get:
6i+4i-4+2=010i=2i=0.2 A
∴ The current through the 4 Ω and 6 Ω resistors, i = 0.2 A

Page No 200:

Answer:


Let the potential at the point o be X volts.
From the figure,
i1=Va-Vo10Va=30V and Vo = XSo, i1=30-X10Similarly,i2=Vo-Vb20=X-1220Andi3=Vo-Vc30=X-230
Also, from kirchoff's junction law we have:
 i1 = i2 + i3
30-X10=X-1220+X-23030-X=X-122+X-2330-X=3X-36+2X-46180-6X=5X-4011X=220X=22011=20 V
Thus, the currents through the three resistors are:

   i1=30-2010=1Ai2=20-1220=820=0.4Ai3=20-230=1830=0.6 A

Page No 200:

Answer:

(a)
From the figure,
Potential difference between the two ends of resistor a = 10 V
Resistance of resistor a =10 Ω
∴ Current through a = 1010=1 A
Since the two batteries are connected opposite each other,
potential difference between the terminals of b = 10 – 10 = 0 V
∴ Current through b = 0 A
(b)


From the figure,
Potential difference between the two ends of resistor a = 10 V.
Resistance of resistor a =10 Ω
∴ Current through a = 1010=1 A
Since the two batteries are again connected opposite to each other,
Potential difference between terminal of b = 10 – 10 = 0 V
∴ Current through b = 0 A

Page No 200:

Answer:


Applying KVL in loop 1, we get:
i1R2-E2+i1+i2R3=0(R2+R3)i1+R3i2=E2    ...(1)
Applying KVL in loop 2, we get:
i2R1-E1+i1+i2R3=0R1+R3i2+R3i1=E1    ...(2)
Multiplying equation (1) by (R1+R3) and (2) by R3 and then subtracting (2) from (1), we get:
i1=E2R1+R3-E1R3R1R2+R2R3+R3R1
Similarly, multiplying equation (1) by R3 and (2) by (R1+R3), and then subtracting (2) from (1), we get:
i2=E1R2+R3-E2R3R1R2+R2R3+R3R1
From the figure,
Va-Vb=i1+i2R3Va-Vb=E1R2+E2R1R1R2+R2R3+R3R1R3Va-Vb=E1R1+E2R21R1+1R2+1R3

(b) The circuit in figure b can be redrawn as shown below:

We can see that it is similar to the circuit in figure a and, hence, the answer obtained will be same.

Page No 200:

Answer:


Applying KVL in loop 1, we get:
i1+i1-i2-1+2=02i1-i2=-1    ...(1)
Similarly, for loop 2:
i2-i1-i2-2+3=02i2-i1=-1    ...(2)
Solving (1) and (2), we get:
i1=i2=1 A
Potential difference between A and B:
VA-VB=E2-i1-i2×1=2-1-1=2 V
Current through the top branch = i2 = 1 A
Current through the middle branch = i1 - i2 = 0 A
Current through the bottom branch = i1 = 1 A

Page No 200:

Answer:


Applying KVL in loop 1, we get:
3i + 6i1 = 4.5    ...(1)
Applying KVL in loop 2, we get:
i-i110+3-6i1=010i-16i1=-3    ...(2)             
Multiplying equation (1) by 10 and (2) by 3 and then, subtracting (2) from (1), we get:
-108i1=-54i1=54108=12=0.5
Substituting the value of i1 in (1), we get:
3i+6×12-4.5=03i-1.5=0 i=1.53=0.5
So, current flowing through the 10 Ω resistor = i - i1 = 0.5 - 0.5 = 0 A

Page No 200:

Answer:


Applying KVL in loop 1, we get:
2+i1-i2×1-2=0i1=i2
Applying KVL in loop 2, we get:
2+i2-i3×1-2-i1-i2×1=0i2-i3-i1+i2=0 i1=i2i2-i3-i2+i2=0i2=i3
Applying KVL in loop 3, we get:
2+i3-2-i2-i3=0i3=0 i1=i2=i3 i1=i2=i3=0

Page No 200:

Answer:

For current to be zero in the middle branch, the circuit should be balanced. According to the Wheatstone bridge principle, balancing a circuit does not depend on the value of resistance R in the middle branch. The circuit in this case is balanced. Hence, any value of R is acceptable.

Page No 200:

Answer:

(a) The simplified circuit can be drawn as shown below.

Here cdeo forms a balanced Wheatstone bridge; therefore, branch od will become become ineffective.
The simplified circuit will then be as shown below.

The equivalent resistance between points c and e,
Rcd=2r×2r4r=r
The equivalent resistance between a and b,
Rab=r×r2r=r2
(b)

 
Let Reff  be the effective resistance of the circuit.Then, from the symmetry of the circuit, we can assume that the current moving along CO enters OB and the current moving along EO enters OD.
Current on CO = current on OB
Current on EO = current on OD
So, the circuit can be simplified as shown below.


From the simplified circuit diagram, effective resistance of the upper half of the circuit will  be
r+2r23r+r=2r+2r3=83rReff=8r6×2r8r6+2r      =8r2×220r=8r10=4r5

Page No 200:

Answer:


From the symmetry of the circuit,we can see that the potential at point C will be equal to the potential at point F. This implies that no current will flow in this branch. Hence, this arm of the circuit can be removed.
Similarly, the potential at point B will be equal to the potential at point G. So, this arm of the circuit can also be removed.
The simplified circuit diagram will be as shown below.
(b)
 
From the figure, the effective resistance of the circuit,
Reff=30×3030+30=15 Ω
The current through the circuit,
i=615=0.4 A
So, the ammeter reading will be 0.4 A.



Page No 201:

Answer:

(a)
Applying KVL in the above loop, we get:

10i+6+5i+12=010i+5i=-1815i=-18i=-1815=-65=-1.2 A

The negative sign indicates that current is flowing in the direction opposite to our assumed direction.
(b) Potential drop across the 5 Ω resistor= 5i = 5×(-1.2 ) = -6 V

(c) Potential drop across the 10 Ω resistor = 10i = (-1.2) × 10  = 12 V

(d) 
Applying KVL in the above loop, we get:
10i+5i+6+12=015i=-18i=-1.2 A
                         
Potential drop across the 5Ω register = -6 V
Potential drop across the 10Ω register = -12 V

Page No 201:

Answer:

Let V be the potential difference between the points a and f. Let current i enter a and leave from f. The distribution of current in various branches is shown in figure.

To calculate the potential difference between a and f, consider the path abcf and apply Kirchofff's Law:
i3r+i6r+i3r=V

2ir3+ir6 = V5ir6 = V
The effective resistance between a and f,
Reff = Vi = 56r

Page No 201:

Answer:

(a) The circuit can be simplified stepwise, as shown below.


The effective resistance between the points a and b,
Reff=5r3×r5r3+r=5r8

(b) The circuit can be simplified, as shown below.

The effective resistance between the points a and b,
Reff=r3+r=4r3
(c)

 
From the figure, it can be seen that axbya is a balanced Wheatstone bridge. The resistors in branch xy will, thus, become ineffective. The circuit can be simplified as under

The effective resistance between the points a and b,
Reff=2r×2r2r+2r=r

(d) The circuit can be simplified as shown below.

The effective resistance between the points a and b,
Reff=r4

(e) The circuit can be redrawn as shown below.


Now, we can see that the circuit is a balanced Wheatstone bridge. So, the branch xy will become ineffective. Thus, the simplified circuit will become as shown below.

The effective resistance between the points a and b,
Reff=2r×2r2r+2r=r

Page No 201:

Answer:

(a) Let the effective resistance of the combination be R. The circuit can be redrawn as shown below.


From the figure,

2RR+2+1=R3R + 2 = R2 + 2RR2-R-2=0R=+1+1+4×1×22×1R=+1+92.1=2 Ω

(b) Total current sent by the battery =6R=62=3 A

Applying Kirchoff's Law in loop 1, we get:

    3×1+2i=62i=3i=32=1.5 A

Page No 201:

Answer:

(a)
The 50 Ω and 200 Ω resistances are in parallel. Their equivalent resistance,
Reqv=50×20050+200=40 Ω
This equivalent resistance and the 2 Ω and 1 Ω resistances are connected in series. The effective resistance of the circuit,
Reff=40+2+1=43 Ω
In this case, the ammeter will read the total current of the circuit. The current through the ammeter,
i=4.343=0.1 A
This current will be distributed in the inverse ratio of resistance between the resistances 50 Ω and 200 Ω. The current through the voltmeter,
i'=5050+200ii'=0.02 A
Reading of the voltmeter = 0.02 × 200 = 4 V
(b)
 b
The two branches AB and CD are in parallel. Their equivalent resistance,
Reqv=52×20052+200=41.27 A
This equivalent resistance is in series with the 1 Ω resistance. The effective resistance of the circuit,
Reff=41.27+1 Ω=42.27 Ω
The total current through the circuit,
i=4.342.27=0.1 A
In this case, the ammeter will read the current flowing through the 50 Ω resistance, which is i1, as shown. The currents in the two parallel branches will distribute in the inverse ratio of the resistances.
i1=200200+52iii=0.08 A
The current through the voltmeter = i - i1 = 0.02 A
The reading of the voltmeter = 0.02 × 200 = 4 V

Page No 201:

Answer:

(a) The effective resistance of the circuit,
Reff=100×400500+200=280 Ω
The current through the circuit,
 i=84280=0.3 A
Since 100 Ω resistor and 400 Ω resistor are connected in parallel, the potential difference will be same across their ends. Let the current through 100 Ω resistor be i1 ; then, the current through 400 Ω resistor will be i - i1.
100i1=400i-i1500i1=400iii=45i=0.24 A
The reading of the voltmeter = 100 × 0.24 = 24 V

(b) Before the voltmeter is connected, the two resistors 100 Ω resistor and 200 Ω resistor are in series.
The effective resistance of the circuit,
Reff=200+100      =300 Ω   
The current through the circuit,
 i=84300=0.28 A
∴ Voltage across the 100 Ω resistor = (0.28 × 100) = 28 V

Page No 201:

Answer:

Let R be the resistance of the voltmeter. For the given circuit, 50 Ω and R are in parallel. The equivalent resistance of these two resistors,
Reqv=50R50+R
This equivalent resistance is now in series with the 24 Ω resistor. The effective resistance of the circuit,
Reff=50R50+R+24 Ω
Current through the circuit,
i=30Reff
Voltage across the 24 Ω resistor, V1 = i×24=30Reff×24 V
Voltage across the 50 Ω resistor, V2 = 30-V1=30-30Reff×24 V  ( V1+V2=30)
It is given that V2 = 18 V
18=30-30Reff×2418=30-3050R50+R+24×243074R+120050+R×24=30-183074R+120050+R=1224=126050+R=74R+1200R130 Ω

Page No 201:

Answer:

It is given that for maximum current, i = 10 mA, the potential drop across the voltmeter will be maximum.
The effective resistance of the circuit,
Reff=575+25 Ω=600 Ω
The maximum value of potential difference measured,
V = Reff × i
   = 600 × 10 × 10−3 = 6 V

Page No 201:

Answer:

Let R be the resistance of the shunt used.
Coil resistance, g = 25 Ω
Current through the coil, ig = 1 mA
Total current i through the circuit in which the ammeter is connected = 2 A
Since R and g are connected in parallel,
   g×ig=Ri-igR=g×igi-igR=25×1×10-32-10-3R=1.25×10-2 Ω

Page No 201:

Answer:

The effective resistance for the voltmeter,
Reff  = (1150 + 50) Ω = 1200 Ω
The maximum current ig through the coil for maximum deflection of 12 V,
 ig=121200 A=0.01 A
Let R be the resistance of the shunt used for ammeter.
Resistance of the coil, g = 50 Ω
Maximum deflection current, i, through the ammeter = 2 A
Since R and g are connected in parallel,
   g×ig=R×i-igR=g×igi-igR=50×0.012-0.01=0.251 Ω

Page No 201:

Answer:

Let D be the null-point of the potentiometer. Since the bridge is balanced at this point,
RADRDB=812
According to the principle of a potentiometer,
RADRDB=lADlDB=812=23 lAD=23lDBlAD+lDB=40 cmlDB23+lDB=40 cm53lDB=40 cmlDB=40×35=24 cm 

Hence, the null-point is obtained 24 cm from B.



Page No 202:

Answer:

It is given that at point D, there is no deflection in the galvanometer, i.e. the bridge is balanced
RADRDB=6R
According to the principle of a potentiometer,
RADRDB=lADlDB6R=3020R=20×630=4 Ω

Page No 202:

Answer:

 (a) Potential difference across AB = Potential at A - Potential at B
  Potential at B = 0 V
⇛ Potential at point A = Potential difference across AB = 6 V
Potential difference across AC = Potential at A - Potential at B
⇛ 4 = 6 - Potential at C
⇛ Potential at C = 2 V

(b) Given:
Potential across AD = Potential across AC = 4 V
⇛ Potential across DB = 2 V
VADVBD=lADlDB42=lAD100-lAD4100-lAD=2lAD6lAD=400lAD=4006=66.7 cm

(c) When the points C and D are connected by a wire, current flowing through the wire will be zero because the points are at the same potential.

(d) Potential difference across AC = Potential at A - Potential at C
⇛ 7.5 = 6 - Potential at C
⇛ Potential at C = −1.5 V
Since the potential at C is negative now, this point will go beyond point B, which is at 0 V. Hence, no such point D will exist between the points A and B.

Page No 202:

Answer:


Let X be the null point on the wire at a distance x cm from point A, as shown.
Given:
Total resistance of the wire AB = 15r
Resistance per unit cm = 15r600
Resistance of x cm of the wire = 15rx600
Resistance of (600 - x ) cm of the wire = 15r600-x600

(a) Applying KVL in loop 1, we get:
i1+i215600rx+15600r600-xi1+i1r=ε        ...i

Applying KVL in loop 2, we get:
i2r+15600rx i1+i2= ε2    ...(ii)
For zero deflection in the galvanometer, i2 = 0. From equation (ii),
  15600rx i1=ε2i1=20εrx
Substituting the values of i1 and i2 in equation (i), we get:
x = 320 cm

(b) Putting x = 560 cm and solving equations (i) and (ii), we get:
i2=3ε22r

Page No 202:

Answer:

In steady state, the capacitor is fully charged and then, it offers infinite resistance to the direct current flow. So, no current can flow through the capacitor in steady state.
The effective resistance of the circuit,
Reff = 10 + 20 = 30 Ω
The current i through the circuit,
i=230=115 A
Voltage drop across the 10 Ω resistor,
V = i × r
   =115×10=1015=23 V
Since the potential drops across the capacitor and the 10 Ω resistor are the same,
the charge stored on the capacitor,
Q = CV
   =6×10-6×23=4×10-6 C=4 mC

Page No 202:

Answer:



(a) Applying Kirchoff's voltage law in loop 1, we get:
In the circuit ABEDA,
10i1 + 20 (i1 + i2) − 5 = 0
⇒ 30i1 + 20i2 = 5    ...(i)

Applying Kirchoff's voltage law in loop 2, we get:
20 (i1 + i2) − 5 + 10i2 = 0
⇒ 20i1 + 30i2 = 5    ...(ii)
Multiplying equation (i) by 20 and (ii) by 30 and subtracting (ii) from (i), we get:
i2 = 0.1 A
and i1 = 0.1 A
∴ Current through the 20 Ω resistor = i1 + i2 = 0.1 + 0.1 = 0.2 A

(b) Potential drop across across AB is,
VAB=0.2×20=4 V

Electrostatic energy stored in the capacitor is given by,
 U=12CVAB2U = 12×4×10-6×(0.2×20)2U = 32×10-6 J

Page No 202:

Answer:

When the capacitors are fully charged, they attain steady state and no current flows through them. Then, equivalent resistance of the circuit,
Reff=3×63+6=2 Ω
Current through the circuit,
i=62=3 A
Current i is divided in the inverse ratio of the resistance in each branch. One branch has resistance of 3 Ω and the other branch has resistance of 6 Ω.
Current i' through the 3 Ω branch,
i'=69i=23×3 A=2 A
Current i'' through the 6 Ω branch,
i''=i-i'=1 A

Voltage across the 1 Ω resistor = 2 A × 1 Ω = 2 V
Charge on the 1 μF capacitor = 2 × 1 μF = 2 μC

Voltage across the 2 Ω resistor = 2 Ω × 2 A = 4 V
Charge on the 2 μF capacitor = 4V × 2 μF = 8 μC

Voltage across each 3 Ω resistor = 3 Ω × 1 A = 3 V
Charge on the 4 μF capacitor = 3 × 4 μC = 12 μC

Charge on the 3 μF capacitor = 3 × 3 μC = 9 μC

Page No 202:

Answer:

Equivalent capacitance of the circuit can be calculatesd as,
Ceq:
1 μF is in parallel with, C=11(3+3)+1(1+1)=32μFSo, Ceq=32+1 = 52 μF
V = 100 V

Total charge in the circuits is,
Q=CeqV=52×100=250 μc
As the volatge across 1μf is 100 V, therfore charge stored on 1 μf capacitors = 100 μC

Charge flowing from A to B = (250 - 100) = 150 μC
Ceq between A and B is 6 μf.
Potential drop across AB,
V=QCVAB=1506=25 V

Potential drop across BC = (100 - 25) = 75 V

Page No 202:

Answer:

(a) When the charge on the capacitor is zero, it acts as short circuit. 
Thus, maximum value of potential difference across the resistor = ε (at t = 0)​

(b) Maximum value of current in the circuit=εr (at t = 0)

(c) Maximum value of potential difference across the capacitor = ε 
(at t = ∞, when the capacitor is fully charged and acts as a open circuit)

(d) Maximum energy stored in the capacitor=12Cε2 (at t = ∞)
(e) Maximum power delivered by the battery=ε2r
(f) Maximum power converted to heat=ε2r

Page No 202:

Answer:

Given:
Area of the plates, A = 20 cm2 = 20 × 10−4 m2
Separation between the plates, d = 1 mm = 1 × 10−3 m,
Resistance of the circuit, R = 10 kΩ
The capacitance of a parallel-plate capacitor,

C=0 Ad =8.85×10-12×20×10-41×10-3 =8.85×10-12×2×10-410-3 =17.7×10-12 F

Time constant = CR
= 17.7 × 10−12 × 10 × 103
= 17.7 × 10−8 s
= 0.177 × 10−6 s
= 0.18 μs

Page No 202:

Answer:

Given:
Capacitance of the capacitor, C = 10 μF = 10−5 F
Emf of the battery, E= 2 V
Time taken to charge the capacitor completely, t = 50 ms = 5 × 10−2 s
The charge growth across a capacitor,
q = Qe-tRC
Q = CE = 10−5 × 2 C 
and q = 12.6 × 10−6 C
12.6×10-6=2×10-5 e-5×10-2R×10-512.6×10-62×10-5=e-5×103R0.63=e-5×103Rlog 0.63=-5×103RR=-5×103-0.2=2.5 

Page No 202:

Answer:

The growth of charge across a capacitor,

Q=Q0.e-tRCQ0= CV = 20×6×10-6 CQ =120×10-6. e-2×10-3102.20×10-6Q=120×10-6. e-1=76 μC

Page No 202:

Answer:

Given:
Capacitance of the capacitor, C = 10 μF
Initial charge on capacitor, Q = 60 μC
Resistance of the circuit, R = 10 Ω

(a)Decay of charge on the capacitor,
q=Qe-tRC
At t = 0,
q
= Q = 60 μC

(b) At t = 30 μs,
q=Q.e-tRCq=Q.e-30×10-610×10×10-6q=60.e-0.3q=44 μC

(c) At t = 120 μs,
q=Q.e-tRCq=Q.e-120×10-610×10×10-6q=60.e-1.2q=18 μC

(d) At t = 1 ms,
q=Q.e-tRCq=Q.e-1×10-310×10×10-6q=60.e-10q=0.003 μC

Page No 202:

Answer:

Given:
Capacitance, C = 8 μF
Emf of the battery, V= 6 V
Resistance, R = 24

(a) Just after the connections are made, there will be no charge on the capacitor and, hence, it will act as a short circuit. Current through the circuit,
i=VR=624=0.25 A

(b) The charge growth on the capacitor,
q=Q 1-e-tRC
One time constant = RC = 8 × 24 = 192 × 10-6 s
For t = RC, we have:
q=Q. 1-e-RCRCq=CV1-e-1q=8×10-6×6×0.632=3.036×10-5 C
V=QC=3.036×10-58×10-6=3.792 V
Applying KVL in the circuit, we get:
E = V + iR
⇒ 6 = 3.792 + 24i
i = 0.09 A



Page No 203:

Answer:

Given:
Area of plates, A = 40 cm2 = 40 × 10−4 m2
Separation between the plates, d = 0.1 mm = 1 × 10−4 m
Resistance, R = 16 Ω
Emf of the battery,V0= 2 V
The capacitance C of a parallel plate capacitor,
C=0 Ad =8.85×10-12×40×10-41×10-4 =35.4×10-11 F
So, the electric field,
E=Vd =QCd  = Q0A0 1-e-tRC=CV0A0 1-e-tRC=35.4×10-11×28.85×10-12×40×10-4 1-e-1.76=1.655×104=1.7×104 V/m

Page No 203:

Answer:

Given:
Area of the plates, A = 20 cm2
Separation between the plates, d = 1 mm
Dielectric constant, k = 5
Emf of the battery, E = 6 V
Resistance of the circuit, R = 100 × 103 Ω
The capacitance of a parallel-plate capacitor,
C=K0Ad =5×8.85×10-12×20×10-41×10-3 =10×8.85×10-12×20×10-41×10-3 =88.5×10-12 C
After the connections are made, growth of charge through the capacitor,
Q = EC (1 − e-tRC)
    = 6 × 88.5 × 10−12 (1 − e-8.98.85)
    = 335.6 × 10−12 C
Thus, energy stored in the capacitor,
U=12Q2C   =12×335.6×335.6×10-2488.5×10-12   =335.6×335.688.5×2×10-12   =6.3×10-10 J

Page No 203:

Answer:

Time constant of the circuit,
τ = RC
   = 1 × 106 × 100 × 10−6
   = 100 s

The growth of charge through a capacitor,
q = VC (1 − e-tRC)
The current through the circuit,
i=dqdt =VCRC·e-tRC =VR. e-tRC =24×10-6· e-t100

For t = 10 min = 600 s
q = 24 × 10−4 × (1 − e−6)
   = 23.99 × 10−4
i=24106.1e=5.9×10-8 A

(a) The plot between current and time for the first 10 minutes is shown below.


(b) The plot between charge and time for the first 10 minutes is shown below.

Page No 203:

Answer:

The growth of charge across a capacitor,
q=Q1-e-tRCq=Q2Q2=Q 1-e-tRC12=1-e-tRCe-tRC=12tRC=ln 2 Let t=nRCnRCRC=0.69n=0.69

The decay of charge across a capacitor,
q=Qe-tRCq=Q2Q2=Qe-tRC12 = e-tRCLet t=nRCnRCRC=ln 2n = 0.69

Page No 203:

Answer:

The decay of charge across a capacitor,
q = Qe-tRC
Here, q = 0.1 % and Q = 1 × 10−3 Q
⇒ 1 × 10−3 Q = Qe-tRC
e-tRC= 10−3
trC=--6.9=6.9
Let t = nRC
nRCRC=6.9n=6.9

Page No 203:

Answer:


The equilibrium value of energy in a capacitor,
U=12Q2C, where Q is the steady state charge.
Let q be the charge for which energy reaches half its equilibrium. Then,
12q2C=12U12q2C=1212Q2Cq=Q22
The growth of charge in a capacitor,
q=Q1-e-tRCq=Q22 , Q22=Q1-e-tRCQ2=Q1-e-tRCe-tRC=1-12-tRC=ln1-12Let t=nRCSo,-nRCRC=ln1-12n=1.23

Page No 203:

Answer:

Power = CV2 = q × V
Now, qV2=qV×e-t/rc12=e-t/rctrc=- ln 0.5         =--0.69=0.69

Page No 203:

Answer:

The rate of growth of charge for the capacitor,
q = εC (1 − e-tRC)

Let E be the energy stored inside the capacitor. Then,
E=q22C=ε2C22C 1-e-tRC2E=ε2C21-e-tRC2

Let r be the rate of energy stored inside the capacitor. Then,
 r=dEdt=2ε2C21-e-tRC-e-tRC-1RCr=ε2R1-e-tRCe-tRC
drdt=ε2R-e-tRC-1RCe-tRC+1-e-tRCe-tRC-1RC
For r to be maximum, drdt=0
ε2R-e-tRC-1RCe-tRC+1-e-tRCe-tRC-1RC=0e-2tRCRC+e-2tRCRC-e-tRCRC=02e-2tRC=e-tRCe-tRC=12-tRC=-ln2t=RCln2

Page No 203:

Answer:

Given,
Capacitance of capacitor, C= 12.0 μF = 12 × 10−6 F
Emf of battery, V0 = 6.00 V
Internal resistance of battery, R = 1 Ω
Time interval, t = 12 μs

(a)
Charging current in the circuit is given as,
i = i0et/RC
Current at, t = 12.0 μs
i=V0Re-t/RCi=61×e-1i=2.207=2.21 A

(b)
During charging, charge on the capacitor at any time ''t'' is given as
Q=CV0(1-e-tRC)
Work done by battery in in time delivering this charge is,
W = QV0

Power deliver by the battery in time ''t'' is,
P=CV02(1-e-tRC)t
Putting, t = 12 μs
P=12×10-6V02(1-e-1)12×10-6P=13.25 W

(c)
Energy stroed in the capacitor at any instant of time is given as,
U=12Q2CU=12C2V02(1-e-tRC)2CU=12CV02(1-e-tRC)2

Rate at which the energy stored in the capacitor is,
dUdt=12CV02×2(1-e-tRC)×(e-tRC)×1RC 
dUdt=V02R(e-tRC-e-2tRC)dUdt=6×61(e-1-e-2)dUdt=8.37 W

So, the power dissipated in heat = P-dUdt
                                  = 13.25 - 8.37 = 4.87 W

(d)
Rate at which the energy stored in the capacitor is increasing = dUdt=8.37 W

Page No 203:

Answer:

Let Q0 be the initial charge on the capacitor. Then,
Q0 = CV
The charge on the capacitor at time t after the connections are made,
Q=Q0e-tRC
i=dQdt=-Q0RCe-tRC
Heat dissipated during time t1 to t2,
U=t1t2i2Rdt  =Q022Ce-2t1RC-e-2t2RC
Time constant = RC
Putting t1 = 0 and t2 = RC, we get:
U=Q022Ce-0-e-2Q0=CV,   U=CV21-1e2

Alternative method:
Heat dissipated at any time = Energy stored at time 0 − Energy stored at time t
                                          
  U=12CV2-12CV2e-2tRCt=RC,  U=12CV2-12CV2e-2  U=12CV21-1e2

Page No 203:

Answer:

The growth of charge on the capacitor at time t ,
Q=Q01-e-tRC
i=dQdt=Q0RCe-tRC
Heat dissipated during time t1 to t2,
U=t1t2i2Rdt  =Q022Ce-2t1RC-e-2t2RCQ0=CV0, U=12CV02e-2t1RC-e-2t2RC

The potential difference across a capacitor at any time t,
V=V01-e-tRC
The energy stored in the capacitor at any time t,
E=12CV2=12CV021-e-2tRC2
∴ The energy stored in the capacitor from t1 to t2,
E=12CV02e-2t1RC-12CV021-e-2t2RCE=12CV02e-2t1RC-e-2t2RC

Page No 203:

Answer:

The capacitance of a parallel plate capacitor,
C=Kε0Ad
The resistance of dielectric material,
R=ρdA

Time constant,
τ=RC=ρKε0,
which is independent of the plate area or separation between the plates.

Page No 203:

Answer:

The equivalent capacitance of the circuit,
Ceqv=C1+C2=2+2 =4 μF
The growth of charge through the capacitor,
q = q0(1 − et/RC)
q0 = CV = 4×10-6×6 = 24×10-6 CtRC = 0.20×10-325×4×10-6 = 2
q = 24 × 10−6 (1 − e−2)
       = 18.4 × 10−6 C
This is the total charge on both capacitors. As the capacitors are in parallel, the total charge will be shared between them. Also, both the capacitors are of same capacitance; so, they will share equal amount of charge.
∴ Charge on each capacitor=18.42 μC=9.2 μC

Page No 203:

Answer:

Initially, the switch S was closed; so, the capacitor was getting charged. Also, the two resistors are connected in parallel. The equivalent resistance of the circuit,
R=1110+110=5 Ω

Initially, the switch was closed and the capacitor was getting charged. So, the two resistances were in parallel connection. Hence, their effective resistance will be 5 Ω.
Potential difference across the 10 Ω resistance, V=125×10=24 V

When the switch is opened, the decay of charge through the capacitor,
Q=Q0 e-tRC=V×C e-tRCtRC = 1×10-310×25×10-6 = 1000250 = 4Q=24×25×10-6×e-4        =24×25×10-6×0.0183        =10.9×10-6C
Current in the 10 Ω resistor,
i=Qt=10.9×10-6 C1×10-3 sec=11 mA

Page No 203:

Answer:

Given:
Capacitance of capacitor ,C = 100 μF
Emf of battery ,E = 6V
Resistance ,R = 20 kΩ
Time for charging , t1 = 4 s
Time for discharging  ,t2 = 4 s

During charging of the capacitor, the growth of charge across it,
Q=CE 1-e-t1RCt1RC = 420×103×100×10-6 = 2Q =6×10-4 1-e-2=5.187×10-4 C

This is the amount of charge developed on the capacitor after 4s.
During discharging of the capacitor, the decay of charge across it,
Q'=Qe-tRC  =5.184×10-4×e-2  =0.7×10-4 C=70 μC

Page No 203:

Answer:

The two capacitors are connected in series. Their equivalent capacitance,
Ceqv=C1C2C1+C2
The growth of charge in the capacitors,
q=Ceqv ε1-e-1rCeqv

Page No 203:

Answer:

Given:
Initial charge on first capacitor = Q
Let q be the charge on the second capacitor after time t.
According to the principle of conservation of charge, charge on the first capacitor after time t = Q - q.
Let V1 be the potential difference across the first capacitor and V2 be the potential difference across the second capacitor after time t. Then,
V1=Q-qC         V2=qCV1-V2=Q-qC-qC                  =Q-2qC
The current through the circuit after time t,
i=V1-V2R=dqdtQ-2qCR=dqdtdqQ-2q=1RCdtdqQ-2q=1RCdt
Integrating both sides within the limits time =0 to t and charge on the second capacitor varying from q=0 to q, we get:
12 ln Q-2q-ln Q=-1tRCln Q-2qQ=-2tRCQ-2q=Qe-2tRC2q=Q1-e-2tRCq=Q21-e-2tRC

Page No 203:

Answer:

Given:
Initial charge given to the capacitor = Q
When the capacitor is connected to a battery, it will charge through the battery. The initial charge will also decay.
The growth of charge across the capacitor due to the battery of emf E,
q=CE1-e-tRC
The decay of charge through the capacitor,
q'=Qe-tRC
The net charge on the capacitor at any time t,
qnet=q+q'       =CE1-e-tRC+Qe-tRC



View NCERT Solutions for all chapters of Class 11